CCDV Message Board CCDV Message Board

Go Back   CCDV Message Board > General Discussion > General Discussions

General Discussions Discuss and make suggestions on issues (non CCDV related).


Post New Thread Reply
 
Thread Tools
Old 12-07-16, 01:09 PM   #1
ScottRobinson
Junior Member
 
Join Date: Oct 2016
Posts: 3
ScottRobinson is on a distinguished road
Good Performance shop for 1971

Hello All,

I just purchased my 1st C3 and I am thrilled.

So the Question 1st... I am looking for a good shop close to Bala Cynwyd to take my 1971 for some performance upgrades. The car has a GM Goodwrench crate 350 SB with Edelbrock Intake/Carb, Hooker Headers and sidepipes. I have a decent budget but still trying to decide on mods to current engine vs. new crate 383 or something else. I want more power. Right now my 2008 Altima with a 270 hp V6 is faster.

Anyway, on the Manic side...I can't get enough of it. I am obsessed. Took the week off of work just to be around it. I'm looking out the window right now hoping the pavement will dry so I can go for a ride. Decent shape overall - compared to others I looked at anyway. Previous owner was in Green Lane area so some of you may know the car.

Thanks in advance for any help.

Scott
Attached Images
File Type: jpg 1st Day.jpg (127.6 KB, 22 views)
ScottRobinson is offline   Reply With Quote
Old 12-07-16, 05:11 PM   #2
Dennis Trayes
CCDV Club Member
 
Dennis Trayes's Avatar
 
Join Date: Mar 2001
Posts: 450
Dennis Trayes
Looks Great

Scott, Congrats on your "new" Corvette. We have a '68. I can't tell you the best place to go for mods as we haven't had any done on ours. You will get more opinions from people that have had work done. Horsepower = $$$. Your best bet might be a new crate motor, with a warranty. Sell the old for a few bucks. You are right about the new cars being faster than the old, but in my opinion the old are better anyway. Enjoy your new ride and check out our club. Dennis
__________________
Lifetime Member
Dennis Trayes is offline   Reply With Quote
Old 12-07-16, 09:01 PM   #3
No Shot
CCDV Club Member
 
No Shot's Avatar
 
Join Date: Dec 2013
Location: Suburban Philly
Posts: 15
No Shot is on a distinguished road
Congrats Scott. I've never used them, but my aunt works in the office (and is a CCDV member) at the Vette Shop in Doylestown. They have been around a very long time and I'm sure some members here have used them....
__________________
All the best...No Shot!
1988 35th Anniversary #1109/2050
No Shot is offline   Reply With Quote
Old 12-09-16, 07:48 PM   #4
thoyer
CCDV Club Member
 
thoyer's Avatar
 
Join Date: Dec 2009
Location: Warminster, Pa
Posts: 263
thoyer is on a distinguished road
Scott,

This may have been addressed by the previous owner(s) but one thing to go over is all of the suspension components - especially the trailing arms. Make sure the brake calipers have been updated also. These C3's are notorious for worn calipers and trailing arms.

Always best to get the suspension and brakes up to snuff before adding more power.............

I have no experience with any shops in the area as I do all of my own work, but I have heard good things about the Vette Shop.

Enjoy!

Tom
__________________
1958, 283/245, White/Red, Top Flight Oct 2016 - 98.5% http://s21.photobucket.com/user/tmh454/library/1958
1960, 283/230, Black/black http://s21.photobucket.com/albums/b298/tmh454/1960/
1971, LS5, 4sp, Bridgehampton Blue http://s21.photobucket.com/albums/b2...54/1971%20LS5/
2007, Z06, Lemans Blue http://s21.photobucket.com/user/tmh454/library/2007
thoyer is offline   Reply With Quote
Old 12-10-16, 02:58 PM   #5
Joel Fellman
Club Historian
 
Joel Fellman's Avatar
 
Join Date: Mar 2001
Location: Northeast Philly
Posts: 3,832
Joel Fellman is an unknown quantity at this point
Thumbs up

You can also consider County Corvette for mods. I haven't used them but they also have a good rep.
Our'76 was stock until about 10/12 years ago. I found a mechanic in the N/E philly area who has worked on the Vette ever since. Upgrades incl: Added new trailing arms, fiberglass rear spring and some other suspension goodies, installed Performance aluminum Stainless calipers all around, replaced the old (tired) orig. L48 with a GM crate ZZ4, added a Holley 750, electric fans, changed the 3.08 rear to 3.55, installed a set of '69 orig. side pipes (for sound & looks) and added a trans kit.
The Vette can best most C-5's and finally runs like a "yellow monster", yet not too radical.
Oh yes, 2 years ago add a 125 shot of Nitrous. Now it's even more fun!
Consider which way you want to go, seek the best mechanic as you are doing & GO FOR IT!!
Joel
__________________
Bought our '76 new in June '76 and joined CCDV that same month. Also owned a 1981 & 1995 coup. Past President 1989, 1990, 2000, 2001 & 2014. Presently CCDV's VP, Club Historian & still own our '76!
Joel Fellman is offline   Reply With Quote
Post New Thread Reply

Tags
1971, good, performance, shop


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for good body shop thoyer C6 Specific Tech Talk 4 10-12-13 12:54 AM
Injection Connection Speed Shop & Performance Center 2006GTO General Discussions 4 01-28-11 03:15 PM
Any good auto body shop around Doylestown? 92RAGTOP Product/Service Recommendations 8 11-04-06 10:39 AM
Good window tint shop? 50th AE Vert General Discussions 19 09-04-06 09:25 PM
Good detail shop? 50th AE Vert General Discussions 4 10-29-03 03:01 PM


All times are GMT -4. The time now is 09:48 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.