need to install spoiler picked up used (HELP)

[bigjohn19136]

:confused:http://i902.photobucket.com/albums/ac226/02magredc5/saleFeb2010007.jpg

[Glennm27]

;ae Sorry John, I can't help with that. :eek:

[Norm Clemmer]

What the heck is that picture of ??? It don't like any part of a vette as far as I can tell from that picture. Looks like it could be off a wing of something that don't fly because there is no trailing edge looks like that so it is something else. Looks like a block of wood is holding it up on the left side rear? Neat post...I give up what is it?

[hcvone]

I hope not. :eek:

[bigjohn19136]

maybe this picture is better i contacted vette shop and i'm going to see what they can dohttp://i902.photobucket.com/albums/ac226/02magredc5/saleFeb2010001.jpg

[Norm Clemmer]

Bigjohn
your thread is titled "need to install spoiler picked up used (HELP) " If you want to put that on your car do it. But...My advice is don't stick that on your car...expecially a convertable...It is not going to look good ...and won't help performance unless it is a dedicated race car...and if it was...it is not adjustable....Don't drill the holes that are required to stick it on...Sell it to someone who has a Honda...Sorry for saying this but you asked. Just my opinion.
Norm

[Glennm27]

John
I have to agree with Norm. I know you are kind of new to Corvettes and I really think that if you install this wing, down the road a ways you will regret doing it. And by looking at those 4 bolts, once installed there's no turning back with out a huge expense.

Just be sure what you're getting into before drilling those holes. Have you seen that wing thing on another C5?

[bigjohn19136]

your rite guy's the car looks great now why should i mess it up thank's http://www.ccdv.com/forums/picture.php?albumid=55&pictureid=683&thumb=1 ('http://www.ccdv.com/forums/picture.php?albumid=55&pictureid=683') http://www.ccdv.com/forums/picture.php?albumid=55&pictureid=671&thumb=1 ('http://www.ccdv.com/forums/picture.php?albumid=55&pictureid=671')

[DR_pewter72]

If you really want a spoiler you should look into getting one like Glenn had on his blue vette. Easy install with 3M tape and they look super !

http://img99.imageshack.us/img99/3456/captureua.jpg (http://img99.imageshack.us/i/captureua.jpg/)

[Glennm27]

your rite guy's the car looks great now why should i mess it up thank's http://www.ccdv.com/forums/picture.php?albumid=55&pictureid=683&thumb=1 (http://www.ccdv.com/forums/picture.php?albumid=55&pictureid=683) http://www.ccdv.com/forums/picture.php?albumid=55&pictureid=671&thumb=1 (http://www.ccdv.com/forums/picture.php?albumid=55&pictureid=671)
WOW, it DOES look great. Love the wheels..... ;bt

[novat_99]

Agreed. I think that thing would take away from the sleek look of your black beauty...and those bolts holes won't come out with Zaino if you decide you don't like it later :D

[Bill Burkholder]

"Auto Buffs" is having a group purchase on the wing that Glenn had. Here's a link to it and they also will install it. They're in NJ near Southampton, NJ.
http://forums.corvetteforum.com/c5-general/2503242-carravagio-autobuffs-rear-spoiler-group-buy.html

[Glennm27]

"Auto Buffs" is having a group purchase on the wing that Glenn had. Here's a link to it and they also will install it. They're in NJ near Southampton, NJ.
http://forums.corvetteforum.com/c5-general/2503242-carravagio-autobuffs-rear-spoiler-group-buy.html

And John, the owners of AutoBuffs are friends of mine, very good friends.... ;)