Dyno Chart?

[Richy]

Anybody have a dyno pull for a stock LS3 with NPP?

[carboman]

I found this on the Corvette Forum.

[Richy]

Thanks, Mark.

[Joel Fellman]

Richy: Does Sandy know what you're thinking of doing? Guess it's a lot safer than Englishtown!?! But watch out! Just ask Bob W.

[Mike02z]

Yup, here ya go...

Before...

http://i46.photobucket.com/albums/f121/jneon1/08%20Corvette/98758f74.jpg

After Headers, 160 T-Stat, Tune, Callaway CAI...

http://i46.photobucket.com/albums/f121/jneon1/78f132d9.jpg

My car is an 08 6 speed with Z51 and NPP. Both pulls are with the NPP open.

I should add that my car only had 600 miles when I did the "before" pulls. It had almost 2000 miles when the "after" pulls were done. Some say my before numbers are low for an LS3 but then there is also a lot of people that think dynapack dynos read low.

[Richy]

Gracias,Mike.

[Bob Weiss]

Those look like my arcs right up til the rod came out of the pan !!

Bob