TORQUEMONSTERZ
10-02-03, 11:16 AM
CLARION PRO AUDIO VRX835 TOUCH SCREEN 7" MONITOR CD/TUNER
Fully Motorized 7" Wide Screen Color LCD Display
Touch Panel Control
Single Play CD Mechanism
Magi-Tune Tuner with 18FM/6AM Presets
CeNET Control of: Optional TV Tuner and 6 Disc Audio CD changer or 6 DVD changer
CD Text, CD Titling, Station Titling
Z-Enhancer Plus
2 A/V Inputs
Rear Vision Camera Input
4 Volt 6-Channel RCA Line Level Output
336,950 Pixel Display
Screen Resolution of 1440 x 234
180-Watt (45W x 4)
Partial Detachable Faceplate
IR Remote Control
ECLIPSE 86120.8 12" SUB WOOFER
3/4Santoprene Surround
Mica-Filled Polypropylene Cone (MFP)
CONEXDual Spider
Kapton Voice Coil Former
4-Layer Long-Throw Voice Coil
"Bottomless" Design
Inverted Dust Cap
Vented Pole Piece
Small Sealed-Box Enclosure
Continuous Power Handling: 175W
Music Power Handling: 350W
PLAYSTAION 2 GAME SYSTEM
CPU 128-bit Emotion Engine
System Clock Frequency 294.912 MHz
Cache Memory Instruction: 16KB, Data: 8KB + 16KB (ScrP)
Main Memory Direct Rambus (Direct RDRAM)
Memory Size 32MB
Memory Bus Bandwidth 3.2GB per Second
Co-processor FPU (Floating Point Unit)
Floating Point Multiply Accumulator x 1,
Floating Point Divider x 1
Vector Units VU0 and VU1
Floating Point Multiply Accumulator x 9,
Floating Point Divider x 3
Floating Point Performance 6.2 GFLOPS
3D CG Geometric Transformation 66 Million Polygons per second
Compressed Image Decoder MPEG2
Graphics Graphics Synthesizer?
Clock Frequency 147.456MHz
Embedded DRAM 4MB
DRAM Bus bandwidth 48GB per Second
DRAM Bus width 2560 Bits
Pixel Configuration RGB:Alpha:Z Buffer (24:8:32)
Polygon Drawing Rate 75 Million Polygons per Second
Screen Resolution Variable from 256 x 224 to 1280 x 1024
Sound "SPU2+CPU"
Number of Voices ADPCM: 48ch on SPU2 plus definable, software programmable voices
Sound Memory 2MB
Output Frequency Variable up to 48 KHz (DAT quality)
IOP I/O Processor
CPU Core PlayStation (current) CPU
Clock Frequency 33.8688MHz or 36.864MHz (Selectable)
IOP Memory 2MB
Sub Bus 32-bit
Interface Types IEEE1394 i.Link?, Universal Serial Bus (USB) x 2
Controller Port x 2, Memory Card x 2
Disc Device CD-ROM and DVD-ROM
Device Speed CD-ROM 24 times speed
DVD-ROM 4 times speed
***I AM ALSO INCLUDING (1) PS2 CONTROLLER AND 1 PS2 HANDHELD CORDLESS REMOTE CONTROL W/ MEMORY CARD FOR WATCHING DVD'S
PRECION POWER INDUSTRY (PPI) PVX 2200 2- CHANNEL AMPLIFIER
PROFFESSIONALLY PAINTED BASECOAT/CLEARCOAT SEBRING SILVER
Power Rating @ 2 ohm: 400 Watts
Power Rating @ 4 ohm: 200 Watts
Bridged Power Rating: 800 Watts
High Mass Internal Heatsink
-12dB Input Attenuation
TC-X Crossovers
Symmetrical Circuit Design
Triple Darlington Circuitry
AM-V Protection Circuitry
QBass Plus
Frequency Response: 4.5 - 100k
I/P Sensitivity: .15 - 12V
S/N Ratio: 115dB
THD: 0.02%
Dimensions: 20.5"L x 10"W x 2.375"H
POWER INVERTOR
300 watts continuous power output, 600 watts peak power output, 2 AC outlets
COSTOM ENCLOSURE, PANALS, WIRING, INSTALLATION
SUB WOOFER ENCLOSURE
CONSTRUCTED OF 3/4 TREATED PLYWOOD, THIS ECLIPSE SUB SITS IN A RECESSED HOLE CUT ON A 38 DEGREE ANGLE. PRESSURE TESTED AND AIR TIGHT FOR QUAILITY AND CLEAR BASS. TIGHTLY MOUNTED (NO SCREWS/HOLE) IN THE CENTER STORAGE COMPARTMENT IN THE TRUNK. THE SIDESM FRONT, AND BACK ARE WRAPPED IN BLACK CARPET FOR A CLEAN STOCK LOOK IN THE TRUNK AREA. HOWEVER THE FACE IS MADE UP OF 1/4 PLEXIGLASS PRECISIONALLY CUT AND FILE FITTED TO EXPOSE THE FACE OF SUB ONLY (NO MOUNTING HARDWARE) BEFORE INSTALLED, IT WAS PAINTED SEBRING SILVER FROM BEHIND (FOR DURABILITY) TO MATCH OUTSIDE EXTERIOR. AND TO ACCENT THE SILVER, I HAD INSTALLED THE AUTHENTIC "CORVETTE" LOGO LETTERS IN BLACK AT THE TOP. FACE IS SECURED BY 4 COUNTERSUNK SCREWS IN EACH CORNER. ON THE FRONT OF THE BOX, YOU WILL FIND A OEM CROSSFLAGS CORVETTE BADGE CENTER MOUNTED OVER THE BLACK CARPET ALSO OFFERING THE BOX A STOCK APPEARANCE.
MOUNTING AND TRIM PANALS
COSTOMLY CONTRUCTED TO HUG THE PERIMETER OF THE CORVETTES TRUNK AREA. MADE UP OF 3/4 PLYWOOD, A LARGE FLUSH RECTANGULAR BASE SECURES THE AMPLIFIER AND PLAYSTATION. IN THE REAR, 2 TRIM PIECES CUT ON 90 DEGREE ANGLES TO TRIM THE EXISTING GAP BEWEEN THE LEFT AND RIGHT STORAGE COMPARTMENTS WHILE STILL MAKING THEM ACCESSABLE. ALL THREE PIECES ARE WRAPPED IN THE SAME MATERIAL AS THE BOX TO GIVE THE ENTIRE TRUNK AREA A ORIGINAL YET COSTOM PHYSIQUE.
WIRING
MADE UP ALL ROCKFORD FOSGATE PRODUCTS. 4 GAUGE WIRE IS FED FROM BATTERY TERMAL (B+) TO DISTRIBUTION BLOCK. BLOCK DELIVERS 8 GAUGE TO AMPLIFIER AND POWER INVERTOR. A SEPARATE BLOCK SUPPLIES GROUND TO EACH UNIT AS WELL. ROCKFORD RCA'S AND HI QUALITY SPEAKER WIRING ALSO CONNECT THE POWER TO ITS DESTINATION. FOR THE HEAD-UNIT UP FRONT, A GM WIRING ADAPTER WAS INSTALLED AND A BLACK FLUSH MOUNTED MOUNTING KIT MAKE THE CLARION SIT CLEANLY. ALL WIRING/INVERTOR IS LOCATED CONVIENTLY BEHIND THE BACK OF THE PASSENGER SEAT AND COMPLETELY CONCEALED BY THE ORIGINAL CARPET.
EVERYTHING YOU SEE HERE WAS PROFFESSIONALY DONE. NOTHING IN THE CAR WAS CUT, DRILLED, OR SCREWED W/ FASTENERS OF ANYKIND TO SECURE THE INSTALLATION ! YOU WONT FIND ANY CORNERS WERE CUT AND WILL ONLY FIND THE BEST PRODUCTS WERE INSTALLED. OVERALL SOUND IS PHENOMINAL AND NEEDS NO IMPROVEMENT.
***I SPENT OVER $3500 ON THIS EQUIPTMENT/LABOR AND LETTING IT GO CHEAP. AS YOU COULDNT BUILD IT THIS CHEEP IF YOU OWNED A STERO SHOP AND DID THE WORK YOURSELF. THIS PACKAGE IS TURN KEY. YOU WILL NEED TO BUY NOTHING!!!
VIEW MANY PICS AT: http://briefcase.yahoo.com/torquemonsterz
Go to "my documents" then to "show all" LOOK FOR C5 CONVERTIBLE (LAST CAR)
$1,700
TORQUEMONSTERZ@AOL.COM
OR
610-329-9192
Fully Motorized 7" Wide Screen Color LCD Display
Touch Panel Control
Single Play CD Mechanism
Magi-Tune Tuner with 18FM/6AM Presets
CeNET Control of: Optional TV Tuner and 6 Disc Audio CD changer or 6 DVD changer
CD Text, CD Titling, Station Titling
Z-Enhancer Plus
2 A/V Inputs
Rear Vision Camera Input
4 Volt 6-Channel RCA Line Level Output
336,950 Pixel Display
Screen Resolution of 1440 x 234
180-Watt (45W x 4)
Partial Detachable Faceplate
IR Remote Control
ECLIPSE 86120.8 12" SUB WOOFER
3/4Santoprene Surround
Mica-Filled Polypropylene Cone (MFP)
CONEXDual Spider
Kapton Voice Coil Former
4-Layer Long-Throw Voice Coil
"Bottomless" Design
Inverted Dust Cap
Vented Pole Piece
Small Sealed-Box Enclosure
Continuous Power Handling: 175W
Music Power Handling: 350W
PLAYSTAION 2 GAME SYSTEM
CPU 128-bit Emotion Engine
System Clock Frequency 294.912 MHz
Cache Memory Instruction: 16KB, Data: 8KB + 16KB (ScrP)
Main Memory Direct Rambus (Direct RDRAM)
Memory Size 32MB
Memory Bus Bandwidth 3.2GB per Second
Co-processor FPU (Floating Point Unit)
Floating Point Multiply Accumulator x 1,
Floating Point Divider x 1
Vector Units VU0 and VU1
Floating Point Multiply Accumulator x 9,
Floating Point Divider x 3
Floating Point Performance 6.2 GFLOPS
3D CG Geometric Transformation 66 Million Polygons per second
Compressed Image Decoder MPEG2
Graphics Graphics Synthesizer?
Clock Frequency 147.456MHz
Embedded DRAM 4MB
DRAM Bus bandwidth 48GB per Second
DRAM Bus width 2560 Bits
Pixel Configuration RGB:Alpha:Z Buffer (24:8:32)
Polygon Drawing Rate 75 Million Polygons per Second
Screen Resolution Variable from 256 x 224 to 1280 x 1024
Sound "SPU2+CPU"
Number of Voices ADPCM: 48ch on SPU2 plus definable, software programmable voices
Sound Memory 2MB
Output Frequency Variable up to 48 KHz (DAT quality)
IOP I/O Processor
CPU Core PlayStation (current) CPU
Clock Frequency 33.8688MHz or 36.864MHz (Selectable)
IOP Memory 2MB
Sub Bus 32-bit
Interface Types IEEE1394 i.Link?, Universal Serial Bus (USB) x 2
Controller Port x 2, Memory Card x 2
Disc Device CD-ROM and DVD-ROM
Device Speed CD-ROM 24 times speed
DVD-ROM 4 times speed
***I AM ALSO INCLUDING (1) PS2 CONTROLLER AND 1 PS2 HANDHELD CORDLESS REMOTE CONTROL W/ MEMORY CARD FOR WATCHING DVD'S
PRECION POWER INDUSTRY (PPI) PVX 2200 2- CHANNEL AMPLIFIER
PROFFESSIONALLY PAINTED BASECOAT/CLEARCOAT SEBRING SILVER
Power Rating @ 2 ohm: 400 Watts
Power Rating @ 4 ohm: 200 Watts
Bridged Power Rating: 800 Watts
High Mass Internal Heatsink
-12dB Input Attenuation
TC-X Crossovers
Symmetrical Circuit Design
Triple Darlington Circuitry
AM-V Protection Circuitry
QBass Plus
Frequency Response: 4.5 - 100k
I/P Sensitivity: .15 - 12V
S/N Ratio: 115dB
THD: 0.02%
Dimensions: 20.5"L x 10"W x 2.375"H
POWER INVERTOR
300 watts continuous power output, 600 watts peak power output, 2 AC outlets
COSTOM ENCLOSURE, PANALS, WIRING, INSTALLATION
SUB WOOFER ENCLOSURE
CONSTRUCTED OF 3/4 TREATED PLYWOOD, THIS ECLIPSE SUB SITS IN A RECESSED HOLE CUT ON A 38 DEGREE ANGLE. PRESSURE TESTED AND AIR TIGHT FOR QUAILITY AND CLEAR BASS. TIGHTLY MOUNTED (NO SCREWS/HOLE) IN THE CENTER STORAGE COMPARTMENT IN THE TRUNK. THE SIDESM FRONT, AND BACK ARE WRAPPED IN BLACK CARPET FOR A CLEAN STOCK LOOK IN THE TRUNK AREA. HOWEVER THE FACE IS MADE UP OF 1/4 PLEXIGLASS PRECISIONALLY CUT AND FILE FITTED TO EXPOSE THE FACE OF SUB ONLY (NO MOUNTING HARDWARE) BEFORE INSTALLED, IT WAS PAINTED SEBRING SILVER FROM BEHIND (FOR DURABILITY) TO MATCH OUTSIDE EXTERIOR. AND TO ACCENT THE SILVER, I HAD INSTALLED THE AUTHENTIC "CORVETTE" LOGO LETTERS IN BLACK AT THE TOP. FACE IS SECURED BY 4 COUNTERSUNK SCREWS IN EACH CORNER. ON THE FRONT OF THE BOX, YOU WILL FIND A OEM CROSSFLAGS CORVETTE BADGE CENTER MOUNTED OVER THE BLACK CARPET ALSO OFFERING THE BOX A STOCK APPEARANCE.
MOUNTING AND TRIM PANALS
COSTOMLY CONTRUCTED TO HUG THE PERIMETER OF THE CORVETTES TRUNK AREA. MADE UP OF 3/4 PLYWOOD, A LARGE FLUSH RECTANGULAR BASE SECURES THE AMPLIFIER AND PLAYSTATION. IN THE REAR, 2 TRIM PIECES CUT ON 90 DEGREE ANGLES TO TRIM THE EXISTING GAP BEWEEN THE LEFT AND RIGHT STORAGE COMPARTMENTS WHILE STILL MAKING THEM ACCESSABLE. ALL THREE PIECES ARE WRAPPED IN THE SAME MATERIAL AS THE BOX TO GIVE THE ENTIRE TRUNK AREA A ORIGINAL YET COSTOM PHYSIQUE.
WIRING
MADE UP ALL ROCKFORD FOSGATE PRODUCTS. 4 GAUGE WIRE IS FED FROM BATTERY TERMAL (B+) TO DISTRIBUTION BLOCK. BLOCK DELIVERS 8 GAUGE TO AMPLIFIER AND POWER INVERTOR. A SEPARATE BLOCK SUPPLIES GROUND TO EACH UNIT AS WELL. ROCKFORD RCA'S AND HI QUALITY SPEAKER WIRING ALSO CONNECT THE POWER TO ITS DESTINATION. FOR THE HEAD-UNIT UP FRONT, A GM WIRING ADAPTER WAS INSTALLED AND A BLACK FLUSH MOUNTED MOUNTING KIT MAKE THE CLARION SIT CLEANLY. ALL WIRING/INVERTOR IS LOCATED CONVIENTLY BEHIND THE BACK OF THE PASSENGER SEAT AND COMPLETELY CONCEALED BY THE ORIGINAL CARPET.
EVERYTHING YOU SEE HERE WAS PROFFESSIONALY DONE. NOTHING IN THE CAR WAS CUT, DRILLED, OR SCREWED W/ FASTENERS OF ANYKIND TO SECURE THE INSTALLATION ! YOU WONT FIND ANY CORNERS WERE CUT AND WILL ONLY FIND THE BEST PRODUCTS WERE INSTALLED. OVERALL SOUND IS PHENOMINAL AND NEEDS NO IMPROVEMENT.
***I SPENT OVER $3500 ON THIS EQUIPTMENT/LABOR AND LETTING IT GO CHEAP. AS YOU COULDNT BUILD IT THIS CHEEP IF YOU OWNED A STERO SHOP AND DID THE WORK YOURSELF. THIS PACKAGE IS TURN KEY. YOU WILL NEED TO BUY NOTHING!!!
VIEW MANY PICS AT: http://briefcase.yahoo.com/torquemonsterz
Go to "my documents" then to "show all" LOOK FOR C5 CONVERTIBLE (LAST CAR)
$1,700
TORQUEMONSTERZ@AOL.COM
OR
610-329-9192